AQUAPLAST RESILIENT-T SPLINTING MATERIAL

Maximum resistance to stretch.
The most tolerant Aquaplast ever.

Handling Characteristics
• Available as Aquaplast Resilient-T with coating or as Aquaplast Resilient Original without coating
• A non-draping material that provides maximum control
• 100% memory allows for repeated reheating and splint revisions - increased cost effectiveness and reduced clinical waste
• Transparent when heated allowing the user to observe landmarks and potential pressure areas.
• Aquaplast Resilient-T provides a temporary bond by pinching the edges together. Ideal for wrap and tack techniques
• For a permanent bond, use Aquaplast Resilient Original or remove the coating of Aquaplast Resilient-T with spirits or by scraping with a sharp instrument

Heating and Working Times
• 1.6mm for 35 seconds at 65°C to 70°C gives 1-2 minutes working time
• 3.2mm for 1 minute at 70°C to 75°C gives 4 to 6 minutes working time

Clinical Indications
• Ideal for splints requiring frequent revisions
• Neurological splinting
• Lower limb weight bearing splints